` Approval Standard for Storage Cabinets for Ignitable (Flammable) Liquids Class Number 6050 December 2016 ©2016 FM Approvals LLC. All rights reserved. Foreword The FM Approvals certification mark is intended to verify that the products and services described will meet FM Approvals’ stated conditions of performance, safety and quality useful to the ends of property conservation. The purpose of Approval Standards is to present the criteria for FM Approval of various types of products and services, as guidance for FM Approvals personnel, manufacturers, users and authorities having jurisdiction. Products submitted for certification by FM Approvals shall demonstrate that they meet the intent of the Approval Standard, and that quality control in manufacturing shall ensure a consistently uniform and reliable product. Approval Standards strive to be performance-oriented. They are intended to facilitate technological development. For examining equipment, materials and services, Approval Standards: a) must be useful to the ends of property conservation by preventing, limiting or not causing damage under the conditions stated by the Approval listing; and b) must be readily identifiable. Continuance of Approval and listing depends on compliance with the Approval Agreement, satisfactory performance in the field, on successful re-examinations of equipment, materials, and services as appropriate, and on periodic follow-up audits of the manufacturing facility. FM Approvals LLC reserves the right in its sole judgment to change or revise its standards, criteria, methods, or procedures. TABLE OF CONTENTS 1. INTRODUCTION ...................................................................................................................... 1 1.1 Purpose .............................................................................................................................. 1 1.2 Scope .................................................................................................................................. 1 1.3 Basis for Requirements..................................................................................................... 1 1.4 Basis for Approval ............................................................................................................ 1 1.5 Basis for Continued Approval ......................................................................................... 2 1.6 Effective Date .................................................................................................................... 2 1.7 System of Units .................................................................................................................. 3 1.8 Applicable Documents ...................................................................................................... 3 1.9.1 Definitions .......................................................................................................................... 3 1.10 References ............................................................
